... Shipment / Lead Times. Please note that you can send new data files, but you can not modify technical features like: changing “2-Layers to | CIRCUIT BOARDS SHOP | 4-layers” or “no silk screen to silkscreen”. If you want to modify those technical features, you have to start from the beginning, which means, make | CIRCUIT BOARDS SHOP | up a new calculation, put the board into the shopping basket, order and send the new data files. | STANDARD LEAD TIMES | > Do | CIRCUIT BOARDS SHOP | I have to expect surcharges? A The selected Standard Lead Time is extended by those additional working days, which are highlighted in the following quotation | CIRCUIT BOARDS SHOP | in the lines “surcharge on standard lead times", "silk screen" and "material / V-cutting". B In order to keep our delivery-on-time-commitment a surcharge on the | CIRCUIT BOARDS SHOP | lead time is imposed if markets rise sharply. In generally: The day, on which the order and the complete production data are made available not | CIRCUIT BOARDS SHOP | later than 6 p.m., does not count as a working day. If the order and / or the production data are made available after ...
[ Circuit Boards Shop ]


... Multilayer Lamination Press ML Lamination Press The book is then transferred to the vacuum lamination press proved to be a major step forward. In | CIRCUIT BOARDS SHOP | this approach, the books are enclosed in a vacuum tight chamber, permitting lamination to take place in a vacuum environment. The press applies heat and | CIRCUIT BOARDS SHOP | pressure so that the thermosetting resin in the prepreg undergoes cross-linking which bonds all layers together. The press then goes through a critical cooling cycle | CIRCUIT BOARDS SHOP | before the book is removed and pulled apart. The edges of the multilayer panels are then trimmed to eliminate any of the resin outflow and | CIRCUIT BOARDS SHOP | to smooth out uneven or rough edges. Special attention was given to environmental compatibility and safety conditions. Furthermore, the facility was designed to accommodate future | CIRCUIT BOARDS SHOP | expansions. The requirements were as follows: - LP formats: Up to 640 x 610 mm - LP thickness: 0.30 – 10.0 mm - Materials: FR- | CIRCUIT BOARDS SHOP | 4, BT-epoxy, polyimide, “Thermount”/RCF - ...
[ Circuit Boards Shop ]


... and which are not, we will determine this to the best of our knowledge. 10.2 If non-plated holes are positioned in a pad, this | CIRCUIT BOARDS SHOP | pad must be bigger than the hole by at least factor 1.5. Otherwise some or all of the pads may be removed. | 11. DATA | CIRCUIT BOARDS SHOP | PROVIDED (DATA INCONSISTENCY) | 11.1 If drilling and measurement plans are included that do not match the drilling program or the contour according to the | CIRCUIT BOARDS SHOP | gerber-data, then the drilling program and the gerber-data will be binding in all cases. | 12. PCB CONTOUR | 12.1 If not otherwise stipulated, the | CIRCUIT BOARDS SHOP | PCB contour will be determined by the centre (=centre vector) of the contour lines provided in the order data. If Slots are represented by you | CIRCUIT BOARDS SHOP | by rectangular outlines, then we assume generally that the corner radius is contained. | 13. TECHNICAL SPECIFICATIONS | PRINTED CIRCUIT BOARDS | 13.1 For further | CIRCUIT BOARDS SHOP | technical specifications of our manufacturing processes, please refer to our Process & Capability Manual in the "Standard" category. These ...
[ Circuit Boards Shop ]