... product. Curtain Coat LPI Mask (alternativ) Solder mask is also be applied using a curtain, single sided coating system. The equipment is designed specifically | CIRCUIT BOARDS PRODUCTION | for the application of liquid photoimagable (LPI) solder mask. Dry LPI Mask Liquid photoimagable solder mask is an epoxy polymer material which is cross-linked or | CIRCUIT BOARDS PRODUCTION | cured by the application of heat. Since the solder mask cannot be imaged in a liquid state, the screened solder mask must be dried without | CIRCUIT BOARDS PRODUCTION | actually curing the material. Drying is done in an oven designed specially for this application. A single heater plenum and a unique baffle system effectively | CIRCUIT BOARDS PRODUCTION | removes the solvent from the liquid solder mask without starting the cross-linking action. Screened panels are manually loaded into the conveyorized oven as they come | CIRCUIT BOARDS PRODUCTION | off the screen printer. The dried panels are automatically loaded on to an accumulator for cool down and availability to the imaging operation. Image LPI | CIRCUIT BOARDS PRODUCTION | Mask Dried solder mask is imaged in a manner similar ...
[ Circuit Boards Production ]


... time as his acceleration must begin from a reduced speed. This comparison with a relay race also helps to recognise the solution to the | CIRCUIT BOARDS PRODUCTION | problem. In analysing the BATON HANDOVER one realizes that this is something which is never influenced by an external trainer, but that the athlete alone | CIRCUIT BOARDS PRODUCTION | must deal with this critical moment. The receiving athlete, in particular, must adapt with lightening speed to conditions that are never the same, i.e. to | CIRCUIT BOARDS PRODUCTION | the speed, rhythm and movements of the previous runner, as well as to the positions of his opponents. This situation is therefore solved de-centrally, at | CIRCUIT BOARDS PRODUCTION | the place of action. This is exactly the principle that we have adopted in our production. Although logistics and distribution still determine when an order | CIRCUIT BOARDS PRODUCTION | must be completed, it is the operators in the departments themselves who are responsible for the regulation of a smooth flow of production. From the | CIRCUIT BOARDS PRODUCTION | first production step, the respective operators promise to complete all RMP orders ...
[ Circuit Boards Production ]


... Requirements Images To help you quickly access the services we offer, the following is a guide to the preferred requirements for producing quality Printed | CIRCUIT BOARDS PRODUCTION | Circuit Boards. Can be supplied as artworks, penplots, photoplots or photoplot files, so long as the quality and registration of the images is of a | CIRCUIT BOARDS PRODUCTION | standard that will enable a good quality board to be produced. Another important criteria is the presence of orientation marks within the boundary of board. | CIRCUIT BOARDS PRODUCTION | These marks could be the board reference so long as it cannot be read from the other side. (This is for your protection to prevent | CIRCUIT BOARDS PRODUCTION | the boards made inside out). Images should comply with design rules that will result in a board that will meet performance and cost requirements. - | CIRCUIT BOARDS PRODUCTION | Scale must be given, tapes securely stuck to the backing sheet, track to pad & track to track joints complete and the backing sheet clean. | CIRCUIT BOARDS PRODUCTION | - Scale must be given and be at least 2:1. Plots must also offer sharp edge definition and traces dense enough for ...
[ Circuit Boards Production ]