... each new job and should contain the following information to ensure that the finished board is to your requirements. - Always required even when | CIRCUIT BOARD FABRICATORS | a drill file is supplied, to enable inspection of panels immediately after drilling and finished boards prior to despatching. Hole sizes must be clearly represented | CIRCUIT BOARD FABRICATORS | with distinct differences between each size. Tolerances are not required unless different to our standard of +0.1 / -0.05 mm. - Preferred with overall mechanical | CIRCUIT BOARD FABRICATORS | dimensions including notches, cutouts and slots. Also preferred is a positioning (datum) dimension (drilled hole is best). Tolerances are not required unless different to our | CIRCUIT BOARD FABRICATORS | standard of + / -0.25 mm. Other information required for all boards includes: board thickness (standard = 1.6mm) base copper thickness (std = 18mm) solder | CIRCUIT BOARD FABRICATORS | mask colour (std = green) solder mask type (std = liquid photoimageable) component legend colour (std = white) bare board testing requirement (std for multilayer | CIRCUIT BOARD FABRICATORS | and fine line production ...
[ Circuit Board Fabricators ]


... LINE INFORMATION | | PRINTED CIRCUIT BOARDS | For Small Series we utilize our combined manufacturing logistics ased on a block building principle. | | CIRCUIT BOARD FABRICATORS | DIFFERENT PCBS | of the same materials and surface structure, but of varying amounts are combined to make up one production lot. Preparation costs incurred | CIRCUIT BOARD FABRICATORS | during the manufacturing process can therefore be shared between several units. We offer the same quality as a series production up to 1000 dm² PCBs | CIRCUIT BOARD FABRICATORS | size and pass the cost savings of the combined production on to you. Data preparation and technical support is, of course, included. | SELECTED CAPABILITIES: | CIRCUIT BOARD FABRICATORS | | Archiving Process Data Drill- / Milling Program Archiving Customer Data Production Data Conversion E-Test optional Design Check UL - Listing optional Design Adjustment Further | CIRCUIT BOARD FABRICATORS | Options | TECHNICAL SPECIFICATION: | Delivery: in Single Board Format as well as in Panelized Board Arrays and Sub-Arrays with / without Fixing Tabs finished | CIRCUIT BOARD FABRICATORS | by Milling and Scoring to size. M| ...
[ Circuit Board Fabricators ]


... new job and should contain the following information to ensure that the finished board is to your requirements. - Always required even when a | CIRCUIT BOARD FABRICATORS | drill file is supplied, to enable inspection of panels immediately after drilling and finished boards prior to despatching. Hole sizes must be clearly represented with | CIRCUIT BOARD FABRICATORS | distinct differences between each size. Tolerances are not required unless different to our standard of +0.1 / -0.05 mm. - Preferred with overall mechanical dimensions | CIRCUIT BOARD FABRICATORS | including notches, cutouts and slots. Also preferred is a positioning (datum) dimension (drilled hole is best). Tolerances are not required unless different to our standard | CIRCUIT BOARD FABRICATORS | of + / -0.25 mm. Other information required for all boards includes: board thickness (standard = 1.6mm) base copper thickness (std = 18mm) solder mask | CIRCUIT BOARD FABRICATORS | colour (std = green) solder mask type (std = liquid photoimageable) component legend colour (std = white) bare board testing requirement (std for multilayer and | CIRCUIT BOARD FABRICATORS | fine line production runs) | ...
[ Circuit Board Fabricators ]